|
- Lubriplate | Boating Forum - iboats Boating Forums
Lubriplate 105, or white engine assembly grease, can be used in LU's It was the standard lubricant for this application until the petroleum companies started marketing the hypoid oils for marine applications
- Lubriplate 777 | Boating Forum - iboats Boating Forums
(Lubriplate #777 is available in large amounts still ) But since Amazon exists now and has essentially everything, finding both Lubriplate #777 and the equivalent is easy There is only one difference between Lubriplate #777 and their Low Temp, Multi-purpose, Low Temperature Grease and that is the dye So if your Evinrude or Johnson outboard
- Lubriplate SPO 255 and Loctite 5900 - iboats Boating Forums
As I am getting my ducks in a row to install the heads and intake on a 2006 5 0 MPI I had a couple questions My first question is about the lubriplate called out on page 3A-26 in the service manual Is there an alternate or is this the only recommended lube for the pushrods and rocker arm
- Lubriplate | Boating Forum - iboats Boating Forums
I have read a lot of posts on grease I have a tube of "all purpose" lubriplate 630 AA I use for pump bearing on a jet drive, would this be ok for gimbal bearing and or other apps?
- Marine Grease or Waterproof Grease - iboats Boating Forums
The Lubriplate always looked like new when I pulled the hubs First of all, the spec sheet didn't say 400, it said 400+ In other words they probably discontinued the test when they reached 400
- grease vs oil | Boating Forum - iboats Boating Forums
I have reciently purchsed an 1957 elgin 12hp Now the information i have found says for lower unit use either lubriplate 105 or api gl5 sae 80 or 90 weight oil I bought both Now the oil is thick but it is still a liquid the lubriplate is so thick i see noway to drain it after it is put in i
- lower unit lube and shear pin - iboats Boating Forums
In non-shift outboards, in other words pull the cord and away you go, don't use the hypoid oil Use the Lubriplate 105 engine assembly grease available at auto parts stores Stick with the bronze shear pins may take awhile to find one but its worth it, longer life for the prop and outboard
- Best Gear Oil for Lower unit - iboats Boating Forums
Re: Best Gear Oil for Lower unit That's an old motor No telling how many hours it has or how much wear Buy what the motor was designed to use
|
|
|